JVC RX-DV5RSL ユーザーズマニュアル
17
Tuning into Stations Manually
On the front panel:
1
Press FM/AM to select the band.
The last received station of the selected band is
tuned in.
The CONTROL buttons now work for tuner
operations.
• Each time you press the button, the band alternates between
tuned in.
The CONTROL buttons now work for tuner
operations.
• Each time you press the button, the band alternates between
FM and AM.
2
Press CONTROL
∞ (or 5)
repeatedly until “< TUNING >”
appears on the display.
appears on the display.
3
While “< TUNING >” still remains
on the display, press repeatedly or
hold CONTROL
on the display, press repeatedly or
hold CONTROL
3 (or 2) until you
find the frequency you want.
• Pressing (or holding) CONTROL
3 increases the frequencies.
• Pressing (or holding) CONTROL
2 decreases the frequencies.
From the remote control:
1 Press FM/AM.
“TUNER” appears on the
operation mode display.
operation mode display.
2 Press repeatedly or hold TUNING
9 or ( until you find the
frequency you want.
• Pressing (or holding) TUNING
9 increases the frequencies.
• Pressing (or holding) TUNING
( decreases the frequencies.
Notes:
• When you hold and release CONTROL
3
(or TUNING
9
on the
remote control) or CONTROL
2
(or TUNING
(
on the remote
control), the frequency keeps changing until a certain station is
tuned in.
tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.
Tuner Operations
FM/AM
E
CONTROL
CONTROL
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
Ex. : When selecting the FM band
ANALOG
VOLUME
SPK.
MHz
AUTO MUTING
L
R
ANALOG
VOLUME
SPK.
AUTO MUTING
L
R
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
Ex. : When selecting the FM band
MEMORY
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
CONTROL
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
Using Preset Tuning
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
quickly tuned. You can preset up to 30 FM and 15 AM stations.
7
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step
2 again.
On the front panel ONLY:
1
Tune into the station you want to preset (see
“Tuning into Stations Manually”).
“Tuning into Stations Manually”).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the
FM Reception Mode” on page 18.
FM Reception Mode” on page 18.
2
Press MEMORY.
The channel number position starts flashing on the
display for about 5 seconds.
display for about 5 seconds.
3
Press CONTROL
3 (or 2) to select
a channel number while the channel
number position is flashing.
number position is flashing.
4
Press MEMORY again while the selected
channel number is flashing on the
display.
channel number is flashing on the
display.
The station is assigned to the selected channel
number.
• The selected channel number stops flashing and then the
number.
• The selected channel number stops flashing and then the
frequency starts flashing.
5
Press CONTROL
3 (or 2) to select another
frequency you want to store while the frequency
is flashing on the display.
is flashing on the display.
6
Repeat steps
2
to
5
until you store all the
stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the
previously stored one.
Storing a new station on a used channel number erases the
previously stored one.
MEMORY
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
EN15-22RX-DV5SL[B]2.pm5
02.8.6, 6:01 PM
17