HP (Hewlett-Packard) CPTOH-0707 ユーザーズマニュアル

The MediaSmart TV (by pressing the Media button on 
the remote control) provides you a simple way to 
connect to your PC or online services to do the 
following:

View photos 

Watch videos

Listen to music 

Access online media services for music, video, or 
photos

When you press the Media button on 
the remote control for the first time, a 
wizard opens to guide you through the 
setup for the network on the TV and on the PC.

Before you can enjoy digital media, you must complete 
these actions in the following order:

Complete initial setup of the TV; see “Using the 
First-Time Setup Wizard” on page 26.

Use the remote control to initiate the MediaSmart 
installation, and select settings for the TV and your 
network, as described in this section.

Install the MediaSmart software on your PC, as 
described in this section.

Complete the TV setup, as described in this 
section.

The Microsoft Windows Media Player (WMP) software 
uses your home network to stream photos, videos, and 
music to your TV. You select which media folders on 
your PC you want to share with your TV. Windows 
Media Player must be installed, and the TV must be 
allowed to display the media shared from your PC. 
These steps occur during the software installation.

You can use any universal plug and play 
(UPnP)-compliant program to stream media to the TV. 
HP recommends and supports Windows Media 
Player 11.

Before starting, check that the TV is connected to the 
LAN router, and that the TV and network equipment 
are both turned on. For instructions to connect the TV to 
a wired network, see “Connecting the TV to your home 
network (LAN)” on page 21.

Before proceeding with the digital media setup, the 
initial TV setup must be completed on your TV. If you 
canceled the wizard when you turned on the TV for the 
first time, start the TV Setup Wizard again by using the 
Setup menu; see “Starting the Setup Wizard” on 
page 80.

Follow the steps for your connection type:

n