JVC GV-LS2 U ユーザーズマニュアル

You can control the unit from a web browser without installing additional software.
To watch a video via a network, "MONITORING SETTINGS"  ( ➭ page 18) must be set.
Required operating environment
OS: Windows 7
Browser: Internet Explorer 9 or later

Use "USERNAME" and "PASSWORD" of the 
administrator  ( ➭ page 16).

If the power is not turned on, press and hold the 
power button to power on.
The record button starts blinking. Wait until it stops 
blinking and off.

•  If a wired connection is established, the factory 

setting is that the camera's IP address is 
"192.168.1.100".

•  If the camera is connected wirelessly, the factory 

setting is that the camera's IP address is assigned 
automatically by the access point. For values to 
be assigned, refer to the setting screen, etc. of the 
access point.

•  To access the camera on the Internet, enter the 

URL obtained via the DDNS service instead of 
the camera's IP address. ( ➭ page 18)

Enter the user name and password of the 
administrator.
Initial setting: USERNAME "root", PASSWORD 
"password".

Click the "LOG IN" button.
If login is successful, the "MONITOR" screen 
appears.