JVC GV-LS2 U ユーザーズマニュアル

Configure the settings for the camera and pantilter on "CAMERA/PAN TILTER". Categorized into "CAMERA 
SETTINGS" and "PAN TILTER SETTINGS".

Change the camera settings.

1

2

3
4
5
6

7

1

Select "OFF" or "ON" for the function that resets the 
zoom ratio automatically if no operation is performed 
for 5 minutes.

2

Select "OFF" or "ON" for the function that reduces 
noise such as wind sounds.

3

Select "+2", "+1", "0", "-1", or "-2" for the audio input 
level of an external mic.
When the sounds are too loud, set it to a smaller 
value. When the sounds are too low, set it to a larger 
value.

4

Select the zoom method and maximum ratio. The 
options vary depending on the model.
Select "10X/OPTICAL", "16X/DYNAMIC", "64X/
DIGITAL", or "200X/DIGITAL".

5

Select "x1", "x2", or "x3" for the amount zoomed 
when the inside button is pressed.

6

Select "x1", "x2", or "x3" for the amount zoomed 
when the outside button is pressed.

7

After changing the above settings, click this button to 
save the changes.

Change the pantilter settings.

1

2

3

1

Select "OFF" or "ON" for the function that resets 
the camera position automatically if no operation is 
performed for 5 minutes.

2

ROTATE ANGLE (PAN1)
Set the value within the range of 1 to 90 degrees 
for the angle rotated when the inside pan button is 
pressed.
ROTATE ANGLE (PAN2)
Set the value within the range of 1 to 90 degrees 
for the angle rotated when the outside pan button 
is pressed.
ROTATE ANGLE (TILT1)
Set the value within the range of 1 to 70 degrees 
for the angle rotated when the inside tilt button is 
pressed.
ROTATE ANGLE (TILT2)
Set the value within the range of 1 to 70 degrees 
for the angle rotated when the outside tilt button is 
pressed.

3

After changing the above settings, click this button to 
save the changes.