Sharp R-520K ユーザーズマニュアル

ページ / 24
18
C L E A N I N G   A N D   C A R E
Disconnect the power cord before cleaning or leave the door open to inactivate the oven during cleaning.
Exterior
The outside surface is painted. Clean the outside with 
mild soap and water; rinse and dry with a soft cloth. Do 
not use any type of household or abrasive cleaner.
Door
Wipe the window on both sides with a damp cloth to 
remove any spills or spatters. Metal parts will be easier 
to maintain if wiped frequently with a damp cloth. 
Cleaners  which  are  marked  specifically  for  use  with 
stainless steel may be used for stainless steel model.  
Follow package directions exactly. Avoid the use of any 
harsh cleaners or one not marked for stainless steel use 
as they may stain, streak or dull the door surface.
Touch Control Panel
Care should be taken in cleaning the touch control panel. 
If the control panel becomes soiled, open the oven door 
before cleaning. Wipe the panel with a cloth dampened 
slightly  with  water  only.  Dry  with  a  soft  cloth.  Do  not 
scrub or use any sort of chemical cleaners. Close door 
and touch 
STOP/CLEAR.
Interior
Cleaning is easy because little heat is generated to the 
interior surfaces; therefore, there is no baking and set-
ting of spills or spattering. To clean the interior surfaces, 
wipe with a soft cloth and warm water. DO NOT USE 
ABRASIVE OR HARSH CLEANERS OR SCOURING 
PADS.  For  heavier  soil,  use  baking  soda  or  a  mild 
soap; rinse thoroughly with hot water. 
NEVER SPRAY 
OVEN CLEANERS  DIRECTLY ONTO ANY PART 
OF THE OVEN.
Waveguide Cover
The waveguide cover is made from mica so requires 
special care. Keep the waveguide cover clean to assure 
good  oven  performance.  Carefully  wipe  with  a  damp 
cloth any food spatters from the surface of the cover 
immediately  after  they  occur.  Built-up  splashes  may 
overheat and cause smoke or possibly catch fire. Do 
not remove the waveguide cover. 
Odor Removal
Occasionally, a cooking odor may remain in the oven. 
To remove, combine 1 cup water, grated peel and juice 
of 1 lemon and several whole cloves in a 2-cup glass 
measuring  cup.  Boil  for  several  minutes  using  100% 
power. Allow to set in oven until cool. Wipe interior with          
a soft cloth.
Turntable/ Turntable Support
The  turntable  and  turntable  support  can  be  removed 
for easy cleaning. Wash them in mild, sudsy water; for 
stubborn stains use a mild cleanser and non abrasive 
scouring sponge. They are also dishwasher-proof. Use 
upper rack of dishwasher. The turntable motor shaft is 
not sealed, so excess water or spills should be wiped 
up immediately.