Philips SPA7355/12 プリント
Issue date 2014-07-18
Version: 3.1.4
12 NC: 8670 000 90227
EAN: 08 71258 16443 38
EAN: 08 71258 16443 38
© 2014 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.
Highlights
SPA7355/12
Multimedia Speakers 2.1
SPDTM bass port 2.75" Satellite drive, 5.25" Subwoofer, 120 W
Specifications
SPD™ technology
Philips Sound Purification Duct (SPD) bass port
technology delivers the deep, pure tones of the
original bass sound. Using an SPD foam material to
process the inner surface of the bass pipe, the special
acoustic damping invented by Philips reduces noise
turbulence and stabilises the tuning frequency. Philips
technical and consumer tests confirm this buffer
provides less coloured, purer quality bass.
2-way speaker system
A dual-range speaker with two drivers produces high
frequencies from the tweeter and low and mid-range
frequencies from the woofer. This maximises output
with a more balanced sound than that from the
commonly used one-way structure, where a single
driver has to produce all the frequencies. So you can
enjoy better acoustics with clear vocals and high
tones along with solid bass, and all for a very
competitive price with this latest Philips range of
speakers.
Mylar tweeter
The unique Mylar material used in the tweeters
ensures incredible sound definition. The full range of
high frequencies is perfectly reproduced, so music
comes to life and films sound like they were meant
to. An integral part of the 2-way design, the tweeter
improves high frequencies resulting in cleaner, more
spacious and more accurate sound in tandem with
the woofer. Improved clarity means you can identify
all the different elements in the music. Listen to the
individual instruments, hear the vocals more clearly,
enjoy your music in refreshing detail.
PP driver material
The polypropylene (PP) material in the driver, which
is soft, makes for better high frequency sounds. It can
help rolling out and produces a purer sound with
better clarity and balance. Easier to integrate with
the tweeter, the use of this lightweight material
results in less vibration.
AUX-in and headphone out
Now you can enjoy your favourite music and
entertainment even easier and more conveniently,
via the aux-in and headphone out jack on the front
of these speakers. Usually, if you want to connect
another device other than your PC you have to
unplug the 3.5 mm jack from the computer and that
is not always expedient. But with the aux-in and
headphone out connections on front you can quickly
and easily listen to music straight from almost any
device.
Well damped driver
A single speaker driver normally incurs a specific
frequency division vibration near the edge of the
diaphragm, often resulting in some sound distortion.
The way to overcome this problem is by using Mylar,
a uniform monomer and a much lighter material that
is more usually used, around the driver cone.
Surrounding the cone in a perfectly symmetrical ring,
the resulting damping effect suppresses the
asynchronous vibration, resulting in a more balanced
and natural sound.
Audio systems
• Output power in total: 50 W
• Power: 220 V 50 Hz
• Frequency range: 20 Hz-20 kHz
• Input impedance: 20 Kohm
• Signal/Noise ratio: >75 dB
• THD: <1%
Audio systems L/R channels
• Rated output power: 12.5 W x 2
• Audio power amplifier: Class-AB Amplifier
• Channel separation: >45 dB
• Input sensitivity: 320 mV
Subwoofer audio systems
• Rated output power: 25 W
• audio power amplifier: Class-AB Amplifier (BTL)
• Input sensitivity: 110 mV
Left/Right speakers
• Speaker driver: 2.75" full range + 1" Mylar tweeter
• Driver power range: 1-30 W x 2
• Frequency range: 80 Hz-20 kHz
• Nominal impedance: 4 ohm
• Sensitivity: 86 dB(2.83 V/1 m)
Subwoofer speaker
• Speaker driver: 5.25"
• Driver power range: 2-120 W
• Frequency range: 45 Hz-200 Hz
• Nominal impedance: 4 ohm
• Sensitivity: 88 dB (2.83 V/1 m)
Connectivity
• Cable length: Power cord, audio cable, satellite
cable: 1.3 M
• Connector: 3.5 mm stereo
Power
• Power LED indicator: Amber
Packaging content
• Subwoofer
• Quick installation guide
• Remote Control: Wired
• 3.5 mm stereo line cable: Fixed
• Number of satellites: 2
Packaging dimensions
• Packaging dimensions (W x H x D):
39.3 x 26.5 x 28.3 cm
• EAN: 87 12581 64433 8
• Gross weight: 4.2 kg
• Net weight: 3.9 kg
• Number of products included: 1
• Packaging type: Carton
• Tare weight: 0.3 kg
• Type of shelf placement: Laying
Product dimensions
• Product dimensions (W x H x D):
21.7 x 22.5 x 22.5 cm
• Weight: 2.924 kg
Outer Carton
• Gross weight: 9 kg
• GTIN: 1 87 12581 64433 5
• Outer carton (L x W x H): 39.5 x 29.5 x 54.6 cm
• Net weight: 7.8 kg
• Number of consumer packages: 2
• Tare weight: 1.2 kg
•