Philips DS6800W/10 ユーザーズマニュアル

12

EN

4 Connect 

to 

your home Wi-
Fi network for 
AirPlay

  

To connect DS6800W to your existing home 
~}         
Wi-Fi setting to DS6800W.

You can do this in two ways (depending on 
which type of Wi-Fi router you use):

&  +   }    ~}   

WPS (Wi-Fi Protected Setup)-enabled 
and supports PBC (Push Button 
Connection) (see 'Scenario 1: Connect 
to a WPS router' on page 12)

&  Manually - if your Wi-Fi router does 

not support WPS (see 'Scenario 2: 
Connect to a non-WPS router' on 
page 13)

\      >HAA~ 
remember your home Wi-Fi settings. Then 
  " +` $ >HAA~ 
powered on and connected to your home Wi-
Fi network automatically.

 Before connection of DS6800W to you home 
~}       !%

1 

Make sure that your Wi-Fi router is 
powered on and working properly. 

2 

Make sure that DS6800W has been 
powered on and booted up successfully 
(see 'Turn DS6800W on' on page 10).

3 

Identify the type of your Wi-Fi router (see 
the user manual of your Wi-Fi router for 
details).

Scenario 1: Connect to a 
WPS router

Note

 

&

<    !   >HAA~   
that DS6800W has been booted up successfully (see 
'Turn DS6800W on' on page 10).

1 

Press the WPS button on your home Wi-Fi 
router.

  

2 

      =  Wi-Fi SETUP on 
the back of the main speaker.

 

» The Wi-Fi SETUP   ! 

yellow and green alternately. 

 

» ~      WI-FI SETUP 

    !    
and the unit beeps. 

 

» DS6800W is connected to your home 

Wi-Fi network successfully.

WPS