Philips DS3880W/10 ユーザーズマニュアル

12

Before connection of DS3880W to 
you home Wi-Fi network, check the 
points below.

1

  Make sure that your Wi-Fi router is 

powered on and working properly. 

2

  Make sure that DS3880W has been 

powered on and booted up successfully 
(see ‘Turn DS3880W on’ on page 11).

3

  Identify the type of your Wi-Fi router (see 

the user manual of your Wi-Fi router for 
details).

Scenario 1: Connect to a 
WPS router

Note

 



Before you press any button on DS3880W, make sure 
that DS3880W has been booted up successfully (see 
‘Turn DS3880W on’ on page 11).

1

  Press the WPS button on your home Wi-Fi 

router.

  

2

  Shortly after step 1, press Wi-Fi SETUP on 

the back of DS3880W.

 

» The Wi-Fi SETUP indicator blinks red, 

yellow and green alternately. 

WPS

4 Connect 

to 

your home Wi-
Fi network for 
AirPlay

  

To connect DS3880W to your existing home 
Wi-Fi network, you need to apply your home 
Wi-Fi setting to DS3880W.
You can do this in two ways (depending on 
which type of Wi-Fi router you use):



Automatically - if your Wi-Fi router is 
WPS (Wi-Fi Protected Setup)-enabled 
and supports PBC (Push Button 
Connection) (see ‘Scenario 1: Connect 
to a WPS router’ on page 12)



Manually - if your Wi-Fi router does 
not support WPS (see ‘Scenario 2: 
Connect to a non-WPS router’ on 
page 13)
Once connected successfully, 
DS3880W will remember your 
home Wi-Fi settings. Then you can 
enjoy AirPlay whenever DS3880W is 
powered on and connected to your 
home Wi-Fi network automatically.
 

EN