Philips WACS7000/05 ユーザーズマニュアル
26
English
5.1 Switching to standby/on and
selecting functions
selecting functions
1
When the set is switched on, press STANDBY-
ON/ ECO POWER to switch it to standby
mode (or press
ON/ ECO POWER to switch it to standby
mode (or press
y
on the remote control)
➜
The Red indicator lights up
➜
Center:The screen dims. Display shows the
connected or previously connected Stations
connected or previously connected Stations
➜
Station: Display shows the connected or
previously connected Center
previously connected Center
– The screen will remain empty if no Center is
found
➜
The time will be displayed.—:— appears if
you have not set the clock
you have not set the clock
2
To switch on, press STANDBY-ON/ ECO
POWER on the set
➜
The set switches to the last source selected
➜
The Green indicator lights up
OR
Press the source button on the remote control
(e.g. CD/MP3-CD, HD, SOURCE)
Press the source button on the remote control
(e.g. CD/MP3-CD, HD, SOURCE)
3
To select functions, press SOURCE once or
more times (or press CD/MP3-CD,
HARDDISK/ HD, SOURCE on the remote
control)
HARDDISK/ HD, SOURCE on the remote
control)
Helpful hint:
– CD/MP3-CD source is only available on the
– CD/MP3-CD source is only available on the
Center.
5.2 Switching to power-saving
mode
mode
In power-saving mode, the set’s display and Wi-Fi
connection are turned off.The Center’s hard disk
also stops working. When the Center is switched
to power-saving mode, you cannot stream music
between the Center and Station or import music
from the PC to Center.
connection are turned off.The Center’s hard disk
also stops working. When the Center is switched
to power-saving mode, you cannot stream music
between the Center and Station or import music
from the PC to Center.
1
When the set is on, press and hold STANDBY-
ON/ ECO POWER to switch it to power-
saving mode (or press and hold
ON/ ECO POWER to switch it to power-
saving mode (or press and hold
y
on the remote
control).
➜
The Red indicator lights up
➜
The display is switched off
2
To switch on, press STANDBY-ON/ ECO
POWER.
POWER.
➜
The set switches to the last source selected
Helpful hints:
– In power-saving mode, the networking, sound,
– In power-saving mode, the networking, sound,
display, language, CD recording settings, the
tuner presets, and the volume level (maximum:
the moderate level) will be retained in the set’s
memory.
tuner presets, and the volume level (maximum:
the moderate level) will be retained in the set’s
memory.
– To protect the hard disk, always switch the
Center to standby/power-saving mode before
removing its power plug from the wall outlet.
removing its power plug from the wall outlet.
PORTABLE
SEARCH
SOURCE
SAME ARTIST
SMART EQ
DBB
5. Basic functions
pg001-pg067_WACS7000_UK 2007.1.30 1:51 PM Page 26