Philips WACS7000/05 ユーザーズマニュアル
53
English
➜
The Center is connected to the external Wi-
Fi network
Fi network
➜
The Stations might be disconnected from the
Center’s Wi-Fi network
Center’s Wi-Fi network
Helpful hint:
– To add Stations to the Center’s Wi-Fi network,
follow the steps under Adding Additional Station
to Center’s Wi-Fi network.
to Center’s Wi-Fi network.
– If you change the WEP/WPA key after you have
added the WACS7000 into your home network,
the connection between the WACS7000 and
your home network will be lost. In this case,
please restart both WACS7000 Center and
Station in order to refresh the IP update.
the connection between the WACS7000 and
your home network will be lost. In this case,
please restart both WACS7000 Center and
Station in order to refresh the IP update.
Applicable cases: Has Wi-Fi network
(AP/Wireless router) in home already.
(AP/Wireless router) in home already.
11.2.2 Network setting on Station
1
On the Station, search for networks
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to
enter Settings, followed by Network and
Wireless
Wireless
c. Press 2 to continue
➜
The display shows: Searching for Networks
➜
The list of networks appears
➜
The display shows: Network Not Found if no
network is found
network is found
2
Follow Steps 2 to 4 under the above Network
setting on Center
setting on Center
3
As prompted, select Yes to apply the settings
➜
The Station is connected to the external Wi-Fi
network
network
➜
The Station will be disconnected from the
Center’s Wi-Fi network
Center’s Wi-Fi network
11.3 Connecting to external
wired network
wired network
The external wired network can be a single PC, a PC
network, another Center or Station
network, another Center or Station
Both the Center and Station can access the wired and
wireless network at the same time. Using the supplied
Ethernet cable, you can connect the Center or a Station
separately to a wired network while maintaining its Wi-
Fi connection (e.g. the Wi-Fi connection between the
Center and Stations or the Wi-Fi connection with an
external network). In this way, you can play the wired
network’s music library only on the Center or on a
single Station(UPnP playback).At the same time, you can
still enjoy all the music playback features on the Wi-Fi
network.
wireless network at the same time. Using the supplied
Ethernet cable, you can connect the Center or a Station
separately to a wired network while maintaining its Wi-
Fi connection (e.g. the Wi-Fi connection between the
Center and Stations or the Wi-Fi connection with an
external network). In this way, you can play the wired
network’s music library only on the Center or on a
single Station(UPnP playback).At the same time, you can
still enjoy all the music playback features on the Wi-Fi
network.
Helpful hint:
–
–
For some wired routers,a "Cross Link" Ethernet cable
should be used instead of the normal "Straight"
Orange cable provided in the box.
should be used instead of the normal "Straight"
Orange cable provided in the box.
11.3.1
Network setting on Center
11.3.1 Network setting on Center
1
Check that the network device is switched on
and the firewall (if applicable) is switched off.
and the firewall (if applicable) is switched off.
2
Connect the supplied Ethernet cable to the
Ethernet ports on the network device and the
Center.
Ethernet ports on the network device and the
Center.
3
On the Center, search for networks
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to enter
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to enter
Settings, followed by Network and Wired
c. Press 2 to continue.
4
If you are using a DHCP*-enabled network
device, select Automatic
*DHCP stands for Dynamic Host Configuration
Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
device, select Automatic
*DHCP stands for Dynamic Host Configuration
Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
Internet
Wireless Base Station 11g T
Wireless Base Station 11g True T
rue Turbo
urbo
Wireless
Wireless
Modem PC
Modem PC
Power
Power
External Wi-Fi network
PC
(UPnP device)
DSL modem
for illustration only
Access point
11. Network setting
pg001-pg067_WACS7000_UK 2007.1.30 1:51 PM Page 53