Philips WACS7000/05 ユーザーズマニュアル
58
English
13.1 Upgrading firmware
The supplied PC Installer CD Wireless Audio
Device Manager (WADM) helps you get the
upgrades for WACS7000 Center and Station.
Device Manager (WADM) helps you get the
upgrades for WACS7000 Center and Station.
1
Register your Philips Wireless Music Center with
www.club.philips.com
www.club.philips.com
2
Download the firmware upgrade files and store
them on your PC
them on your PC
3
Place Center and Station(s) side by side on a
flat and firm surface
flat and firm surface
4
Connect Center and Station(s) to power
supply
supply
➜
HD screen appears on Center
➜
HD screen appears on Station(s) when the
Station is connected to Center
Station is connected to Center
5
Connect Center to your PC via the supplied
ethernet cable.
ethernet cable.
6
Install and lauch WADM (see Connect to your
PC section B)
PC section B)
7
Click to enter the Firmware upgrade sub-menu
8
As prompted, click Browse and indicate the
location where you kept the firmware upgrade
files on PC
files on PC
9
Click Apply to start upgrading firmware
On Philips Wireless Music Center:
➜
The display shows “Updating firmware,
please wait...”
➜
Center will reboot itself during the
installation process
➜
When Center returns to HD screen, the
installation is completed
Then, on Philips Wireless Music Station:
➜
Installation starts automatically
➜
When Station returns to HD screen, the
installation is completed
IMPORTANT!
On Philips Wireless Music Center/Station:
- Never interrupt the firmware upgrading
before its completion.
- Before finishing the installation, never
operate other functions.
On Philips Wireless Music Center/Station:
- Never interrupt the firmware upgrading
before its completion.
- Before finishing the installation, never
operate other functions.
13.2 Restoring previous firmware
After the Center’s firmware is upgraded, you can
restore it to its previous version as desired.
restore it to its previous version as desired.
1
On Center, select HD mode and then, select
Restore firmware
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3 or 4 and 2 to
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3 or 4 and 2 to
enter Settings, Firmware and Restore firmware
one by one.
one by one.
2
Press 2 to select Yes
After upgrading or restoring the Center’s
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
13.3 Re-establish Wi-Fi network
of Center and Stations
of Center and Stations
1
On Center, select HD mode and then enter
Installation Mode
Installation Mode
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3 or 4 and 2 to
b. Press the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. Press 3 or 4 and 2 to select Add New
Station
➜
Searching for Stations starts
2
On Stations, enter Installation Mode
a. Remove the power plug of Stations and then,
a. Remove the power plug of Stations and then,
connect them to the power supply again
➜
Connecting to Center appears
b. On the remote control, press MENU to
enter the selection screen of Installation Mode
and Select Server
and Select Server
c. Press the navigation controls 3 or 4 and 2 to
enter Installation Mode
➜
The Stations start to connect Center
3
Press STOPÇ on Ce;nter when all the Stations
are found
are found
13. Firmware Upgrade
pg001-pg067_WACS7000_UK 2007.1.30 1:51 PM Page 58