Philips WAS5/05 ユーザーズマニュアル

14

If there is interference in the neighborhood,
the set may pause during playback or
respond slowly to your operation. In such
cases
– Use the WEP* key when connecting your Center
and Station to an existing wireless PC network. See
the manual Connect to your PC: Option 2.
– Change the operating channel of your Center
and Station when connecting them to an existing
wireless PC network. To learn about how to change
channels, see the Owner’s manual of your router
and the manual Connect to your PC: Option
2.
– If possible, change the operating channels of the
other Wi-Fi devices at your home.
– Turn the above devices in different directions to
minimize interference.

* stands for Wired Equivalent Privacy. It is a
security protocol for wireless local area
network

You can easily connect your WAS5 to your
existing home audio systems, such as the audio/
video receiver, home theatre system, mini/micro
system, or multimedia speaker boxes (with built-
in amplifier) and audio amplifiers.

1

Insert the one-plug end of the audio cables

 (supplied) to LINE OUT

2

Connect the two-plug end of the audio cables

to the AUX IN (or AUDIO IN) terminals of
the additional appliance, red plug to the to the
red socket AUX IN R and white plug to the
white socket AUX IN L

LINE OUT

DC

(for illustration only)

3

 Select AUX mode in the connected audio

      system

1

Make sure all the connections have been made
before switching on the power supply

2

Connect the AC power cord to the wall socket.
This switches on the power supply

When Center or Station is switched to standby,
it is still consuming some power. To disconnect
the system from the power supply
completely, remove the power plug from
the wall socket.

p001-p022_WAS5_Eng_22

9/30/2005, 16:48

14