Philips WAS5/05 ユーザーズマニュアル

20

If desired, you can restore your Center or Station
to their default setting (including the network
setting).

●

Resetting Center or Station helps to re-establish
the connection between Center and Station.

●

To change the way your Center connects to PC,
you need to reset the Center (see the Option 1,
Option 2 or Option 3 in manual Connect to
your PC)

1

Check the set is switched on (See Basic
functions, Switching on/to standby and
selecting functions, Switching to Eco
power/ on)

2

Press and hold STOP • MENU to enter the
MENU screen (or on the remote control, press
MENU)

3

Use the navigation controls 3 or 4 and 2
to enter Settings

4

Use the navigation controls 3 or 4 and 2
to enter Restore settings

5

Press 3 or 4 and 2 to select Yes

➜

The set is rebooted. Language selection

screen appears

6

Select your desired language: English, French,
Spanish, Dutch, Italian and German

➜

The set enters Installation Mode

➜

The search for Center or Stations starts. The

Wi-Fi connection is being re-established

●

On the Stations, enter Installation Mode by:

      a. Remove the Station’s power plug and then,

connect it to the power supply again

➜ 

“Connecting to Center” appears

b. Press MENU or STOP to enter the selection
screen of Installation Mode and Select
Server

      c. Use the navigation controls 3 or 4 and 2 to

select Installation Mode

●

On the Center, select HD mode and then, enter
Installation Mode by:
a. Press MENU

b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c.  In Station Mgnt menu,  use the navigation

controls 3 or 4 and 2 to select Add New
Station

➜

Searching for Stations starts

●

Do as you did in the first-time Wi-Fi connection
(see 

the user manual for WACS5: 

Set up Wi-Fi connection between Center
and Station)

7

On Center, press STOP

Çto exit Installation

Mode when all your Stations are found

p001-p022_WAS5_Eng_22

9/30/2005, 16:48

20