Philips BDH4222V/00 ユーザーズマニュアル

1

Press the INPUT key on the front panel of the monitor, or press the 
INPUT key on the remote control.

●

Pressing the INPUT key will cycle the monitor thru all available 
input signal sources in the following order:

Notes:
Some of the Direct Input Selection keys will not be applicable for this 
monitor.

For AV mode, use AV1.

For S-Video, use AV2.

If you prefer not to cycle thru all available inputs, you can use the Direct 
Input Selection keys of the remote control.

1

Select the input that you would like to switch to.

2

Press the Direct Input Selection 

key for that input.

1

To turn up sound volume, press VOLUME + on either the front 
panel of the monitor or on the remote control.

2

To turn down sound volume, press VOLUME - on either the front 
panel of the monitor or on the remote control.

1

If you would like to turn off the volume on a temporary basis, press 
the MUTE key.

2

When the monitor’s volume is muted, the monitor will display 
"MUTE" on the upper right corner of the screen.

3

To turn off the mute mode, press the MUTE key or the 
VOLUME +/- button again.

●

If the monitor’s built-in speakers are turned off using the OSD, then 
volume controls will not affect volume generated by the built-in 
speaker.

●

Volume controls are valid when audio output is set to “variable”. 
(See page 38) If the audio output is set 

to “fixed”, then volume 

control is not active.

(

S

)