Allied Telesis AT-MC1008/GB AT-MC1008/GB-10 データシート
製品コード
AT-MC1008/GB-10
Link Test
The link test is a fast and easy way for you to test the
connections between the media converter ports and the
end-nodes that are connected to the ports. If a network
problem occurs, you can perform a link test to
determine which port is experiencing a problem, and so
be able to focus your troubleshooting efforts on the
cable or end-node where the problem resides.
connections between the media converter ports and the
end-nodes that are connected to the ports. If a network
problem occurs, you can perform a link test to
determine which port is experiencing a problem, and so
be able to focus your troubleshooting efforts on the
cable or end-node where the problem resides.
MissingLink
TM
The MissingLink
TM
feature enables the two ports on the
media converter to pass the ‘Link’ status of their
connections to each other. When the media converter
detects a loss of connection to an end-node, the media
converter shuts down the connection to the other port,
thus notifying the end-node that the connection has
been lost.
connections to each other. When the media converter
detects a loss of connection to an end-node, the media
converter shuts down the connection to the other port,
thus notifying the end-node that the connection has
been lost.
Smart MissingLink
TM
The Smart MissingLink
TM
feature performs exactly the
same function as MissingLink
TM
with one additional
feature. When a link is lost on a port, the LINK LED of
the port which still has a valid connection to its end-
node starts to blink. This allows you to quickly
determine which port still has a valid connection (LINK
LED blinking) and which port has lost its connection
(LINK LED off).
the port which still has a valid connection to its end-
node starts to blink. This allows you to quickly
determine which port still has a valid connection (LINK
LED blinking) and which port has lost its connection
(LINK LED off).
Technical Specifications
System LEDs
PWR
Green
Indicates that the converter
power is ON
power is ON
OFF
Indicates that the converter
has no power signal
has no power signal
Fiber Optic Port LEDs
(GBIC or SFP Expansion Slot)
LNK
Solid Green
Indicates a valid link has been
established between the port
and the end-node
established between the port
and the end-node
OFF
Indicates that there is no link
between the port and the
end-node
between the port and the
end-node
ACT
Flashing Green Indicates that the port is
transmitting and/or receiving
data packets
data packets
OFF
Indicates that there is no
activity on the port
activity on the port
Mode Push Button LEDs
ML
Green
MissingLink
TM
mode is enabled
OFF
MissingLink
TM
mode is disabled
SML
Green
Smart MissingLink
TM
mode is
enabled
OFF
Smart MissingLink
TM
mode is
disabled
LT
Green
Link Test mode is enabled
OFF
Link Test mode is disabled
Physical Characteristics
Dimensions:
10.5cm x 9.5cm x 2.5cm
(W x D x H)
(4.125in x 3.75in x 1.0in)
Weight:
0.27 kg (0.60 lbs)
Power Characteristics
External Power Supply
100-120/220-240V AC,
50/60Hz +/-3%
50/60Hz +/-3%
Input Supply Voltage
12vDC +/-5%
Max Current
0.5A
Power Consumption
6W
Environmental Specifications
Max Operating Temp:
0°C to 40°C
(32°F to 104°F)
(32°F to 104°F)
Max Storage Temp:
-25°C to 70°C
(-13°F to 158°F)
(-13°F to 158°F)
Operating and
Up to 3,048 meters
Storage Altitude:
(10,000 feet)
Relative Humidity
5% to 95%
Operating and Storage:
non-condensing
Electrical/Mechanical Approvals
Safety
Conforms to all standards normally
supported by Allied Telesis products
including safety standards EN 60950
(TUV), UL 60950 (cULus),
CE Compliant, EN 60825
supported by Allied Telesis products
including safety standards EN 60950
(TUV), UL 60950 (cULus),
CE Compliant, EN 60825
Standard
IEEE 802.3, IEEE 802.3u
Immunity
Conforms to EN 55024 immunity
standard EMI/RFI FCC Class A,
EN 55022 Class A, VCCI Class A,
C-TICK
standard EMI/RFI FCC Class A,
EN 55022 Class A, VCCI Class A,
C-TICK
Ordering Information
AT-MC1004-xx
Gigabit Ethernet media converter, 1000T to 1000SX (SC)
AT-MC1008/GB-xx
Gigabit Ethernet media converter, 1000T to GBIC
AT-MC1008/SP-xx
Gigabit Ethernet media converter, 1000T to SFP
Where xx =
10 for US
30 for UK
40 for Australian
50 for European
30 for UK
40 for Australian
50 for European
Associated Products
AT-MCR12-xx
12 slot power distribution chassis
AT-TRAY4
19-inch rack-mount chassis for up to four media
converters
converters
AT-TRAY1
19-inch rack-mount chassis for one media converter
AT-WLMT
Wall-mount bracket for one media converter
MC100x Series
| Pluggable Media Converters
USA Headquarters
|
19800 North Creek Parkway
|
Suite 200
|
Bothell
|
WA 98011
|
USA
|
T: +1 800 424 4284
|
F: +1 425 481 3895
European Headquarters
|
Via Motta 24
|
6830 Chiasso
|
Switzerland
|
T: +41 91 69769.00
|
F: +41 91 69769.11
Asia-Pacific Headquarters
|
11 Tai Seng Link
|
Singapore
|
534182
|
T: +65 6383 3832
|
F: +65 6383 3830
www.alliedtelesis.com
© 2007 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-006235 Rev. E