Philips DVDR3570H/05 ユーザーズマニュアル

80

(underlined options are the factory default settings)

This setting is only required if you are using the recorder’s 

COAXIAL/OPTICAL OUT socket to connect other audio/video 
device.

{ All } 

– Select this if the connected device has a 

built-in multi-channel decoder that supports 
one of the multi-channel audio format 
(Dolby Digital, MPEG-2).

{ PCM only } 

– Select this if the connected device is not 

capable of decoding multi-channel audio. The 
system converts the Dolby Digital and 
MPEG-2 multi-channel signals to PCM (Pulse 
Code Modulation).

This setting is only required if you used the recorder’s AUDIO 

OUT L/R sockets to connect other audio/video device.

{ Stereo } 

– The sound output through the left and right 

audio channels. Use this setting when this 
recorder is connected to a TV or Stereo 
system.

{ Surround }  

– The connected audio/video device is 

compatible with Dolby Surround. Dolby 
Digital and MPEG-2 multi-channel are mixed 
to a compatible two-channel output signal.

This mode optimises playback of sound at low volume. High 

volume outputs will be softened and low volume outputs are 
brought upward to an audible level.  This feature is only 
applicable to DVD disc playback.

{ On } 

– Turn on night mode.

{  Off } 

– Turn off night mode. Select this to enjoy the 

surround sound with its full dynamic range.