Fujitsu Primergy Rack Console RC22 S26361-F2844-L220 プリント

 

 

   

Issue   August 31, 2004 

   

   

   

   

Pages   2 

 

   

 
Highlights 
„  Occupies only one height unit  
„  15” TFT flat screen display 
„  16.7 million colors, 1024 x 768, 32-bit pixels 
„ Keyboard, touchpad 
„  Connection for PS/2 and USB  

USB not suitable for PRIMEPOWER 

„  Keyboard is Microsoft® Windows® compatible 
„  Integrated bicolor touchpad, lighter-colored spot provides 

right mouse button click  

„  Telescopic rails with variable depth from 670 to 860 mm 
„  Integrated cable management 
„  Deactivation of the “double click” function 
Positioning 

Mounting servers and their extension components in 19” 
racks ensures reliable operation and simplified maintenance. 
For administration and operation, a monitor and a keyboard 
are required, often connected via a console switch to the 
various servers in one rack. 
A standard 15” monitor usually takes up eight height units of 
valuable space, and the keyboard at least an additional height 
unit. These units could be put to better use to accommodate 
more servers or storage subsystems, or a UPS. With the 
RC22 rack console, Fujitsu Siemens provides a means of 
doing this and at the same time helps create an ergonomically 
optimized workplace.  
The 19” rack console is implemented as a slide-in tray and 
occupies only a single height unit in a rack. It contains a 15” 
TFT display, a complete keyboard and an additional touch-
pad.  

The 19” rack console combines the monitor and keyboard into 
a single functional unit. The TFT display has an adjustable 
tilting angle and is mounted behind the keyboard with its inte-
grated touchpad. When not in use, the monitor can be folded 
out of the way into the tray. The monitor is then switched off 
automatically to save energy and to extend the monitor’s life. 
When pulled out, the tray locks into place. The lock can be 
released to push it in again. 

Thanks to its flicker-free operation and high resolution, the 
TFT display is a very ergonomic device. Additionally, the 
complete display unit can be mounted at the ideal working 
height. The operator is seated in the same position as if work-
ing at a desk. The tilt of the display can also be set to the best 
position. 

Many installations consist of several single servers (clusters, 
dedicated servers) and have to be administered from a single 
point of operation. In this case, a console switch can be used 
to switch the monitor, keyboard and mouse to different serv-
ers. This can be done using hot keys on the console. The 
user interface is implemented with an on-screen display that 
is available on the monitor for a short time.