Philips PPF675E/GBB ユーザーズマニュアル
20
Philips · PPF 675
EN
Outgoing Calls
Caller List:
Press and hold @ (at least two seconds).
Use the [ to select an entry from the list of callers.
Calls Received
CLIP Prerequisite
Sending Fax Manually
1
Insert the document.
2
Enter the desired number using the numeric keypad or
select a saved entry.
3
Press ß.
4
Press START.
Direct Inward Dialling or
Selecting Sub-address
Selecting Sub-address
Direct Inward Dialling or Sub-address
You can send a fax to a direct-inward dialling number or a
sub addressor or call from a direct-inward dialling number
or sub address - for example to use a certain service of a fax
database provider. For this purpose, attach th e direct-
inward dialling number or sub address with a short dialling
pause to the fax number.
1
1
Enter the desired number using the numeric keypad or
select a saved entry.
2
Hold R pressed (for at least two seconds).
3
Enter the direct-inward dialling number or sub address.
4
Press START. The direct-inward dialling number or
sub address is dialled only after a short pause.
Sending to Multiple Recipi-
ents (= Broadcasting)
ents (= Broadcasting)
Broadcast Transmissions
You can send one fax to multiple recipients in succession.
Entering Recipients Individually
1
Insert the document.
2
Press OK, 34 and OK. The document is now
read.
3
Enter the desired number using the numeric keypad or
select a saved entry.
4
Confirm with OK.
5
Enter the next telephone numbers.
6
Confirm with OK. You can enter up to 25 recipients.
7
Press START. The device transmits the fax message
successively to all recipients.
Sending a Fax to a Group
1
Insert the document.
2
Press OK, 13 and OK.
3
Use [ to select the group to which you would like to
send a fax.
4
Confirm with OK.
5
Using [ select SEND FAX?.
6
Confirm with OK.
Transmission to Multiple Recipients
Notice
Access Function
You can also load the redial list by pressing OK,
22
You can also load the redial list by pressing OK,
22
and OK.
Notice
Access Function
You can also load the caller list by pressing OK,
21
You can also load the caller list by pressing OK,
21
and OK.
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Iden-
For this function to work, the Caller Line Iden-
tification (CLIP) must be activated for your tel-
ephone connection (country and network
dependent). The number and name will not be
shown if the caller suppresses his number.
Notice
Transmission to Multiple Recipients
If your device cannot reach a recipient, the fax
If your device cannot reach a recipient, the fax
message is sent to the other recipients. After the
device has called all recipients, it once again dials
the numbers that previously could not be
reached.
ppf-675-eco-manual-uk-253120913-b.book Seite 20 Mittwoch, 30. September 2009 12:58 12