Philips PPF675E/GBB ユーザーズマニュアル

Connection to the Device

You can connect additional devices directly to your device.

Insert the telephone cable of the additional device into the
EXT

 socket (RJ-11-connection) on the device.

Connecting Additional Devices

Direct Connection Recommended

Order of Connections

In order for the fax switch to function, the device must be

first in the series if multiple devices are connected to the

same telephone socket. Follow the correct order.

Connection to the First Telephone Socket

Easylink

With the Easylink fun ction you can control your device

with  additional telephones.  To  use this function, ad di-

tional telephones must be set to the tone dialling mode

(DTMF/MFV tones) (for this purpose see the operating

manual of your additional telephone).

If you pick up at an additional device and hear that you are

receiving a fax (whistling tone or silence), you can start the

fax reception by pressing *5 on the additional tele-

phone or pressing START on the device.

If you pick up on an add itional telephone and the device

continues to ring or attempts to receive a fax, you can dis-

connect the device f rom the line.  Press  ** on the

additional telephone.

Changing Easylink Codes!

Press OK, 54 and OK.

Enter the new code for starting fax reception.

Confirm with OK.

Enter the new code for taking over the line on an addi-

tional device.

Confirm with OK.

Direct Connection Recommended
We recommend direct connection to the device

because  this allows the fax  switch  to  function

optimally and to control the additional devices.

Connection to the First Telephone 
Socket
If you have multiple telephone sockets for the

same  telephone  line, th e  device must be con -

nected to the first telephone socket.

Changing Easylink Codes!
Only change the codes if it is absolutely n eces-

sary. The codes must begin with * or # and

must be different.

ppf-675-eco-manual-uk-253120913-b.book  Seite 31  Mittwoch, 30. September 2009  12:58 12