Electrolux E23BC68JSS オーナーマニュアル

 

1  Remove all items from basket.

 

2  Remove basket by pulling basket out to its full 

extension and lift out.

To reinstall upper basket, position basket onto the 
retainer clips making sure the front of the basket rests 
in the retainer clips on the stabilizer bar.

The freezer tilt wire shelf (located on the inside of the 
freezer drawer) is not designed to be removed.

To reinstall lower basket, insert basket into retainer 
clips. 

If basket is not resting on stabilizer bar retainer clips, 
the drawer will not close properly.

Lift up on the front of the upper divider and pull out. 

Lift up on the rear of the lower divider and pull out.  

Spill Guard Tray should be hand washed in warm 
water.

 

1  Remove all items from basket.

 

2  Remove the basket by tilting it forward and lifting 

it from the retainer clips.