Philips Streamium Wireless Music Center&Station WACS5 クイック設定ガイド

ページ / 4
Express Installation
Note:
– Option 2 and Option 3 are for users 
experienced in network installation.
Option 2:
Wireless connection
Choose this option if you want to 
connect Music Center to a wireless
Router/ wireless Access Point or an
existing wireless network
1
Check the wireless router/access point is working
properly. Write down its SSID and also the WEP or
WPA key if it is enabled in the router/access point
2
Click to select Music Center connect to Wireless
Network
3
When prompted by the installation wizard, connect
the supplied Ethernet cable (straight cable) the
ETHERNETports on Center and PC
When the screen on the right appears,
a
. Input the SSID you wrote down in the above 
step 1
b.
In WLAN Mode, click Infrastructure mode
c.
Input the WEP or WPA key you wrote down in
the above step 1
5
Follow the screen instructions to finish the PC 
connection.
The screen shows: “The WiFi settings of Music 
Center have been changed. ...... ”
Tips:
– It is strongly recommended that WEP key encryption be used for better network perform-
ance and security.
– In Infrastructure mode, Channel is assigned automatically by the router/access point.
– To change Channel, input the SSID of your wireless network and select 
Ad-hoc mode in 
the above 
4a and 4b.
Express Installation
Express Installation
Express Installation provides WAC5’s standard PC 
connection.
Select your installation option according 
to your existing home network. For quicker and 
easier installation, select Option 1.
Option 1:
Direct connection 
(recommended)
Choose this option if you do not have 
local network at home, either wired or 
wireless
1
Click to select Music Center connect to Standalone
PC, no LAN/Wireless Network     
2
When prompted by the installation wizard, connect the
supplied Ethernet cable (straight cable) to the
ETHERNETports on Center and PC
3
Follow the screen instructions to finish the PC 
connection.
The screen shows: “The connection to your Music
Center has been established”
4
Click Next to start DMM installation
The icon 
appears on your computer 
desktop after DMM installation is finished
 
OPTICAL OUT
DIGITAL OUT
Center
ETHERNET
Tips:
– 
For Option 1 only: If your PC is also connected to Internet via XDSL modem, exit DMM 
before starting Internet access.
 
OPTICAL OUT
DIGITAL OUT
Center
ETHERNET
Eng  2005.11.16  15:25  Page 2