Philips Streamium Wireless Music Center&Station WACS5 ユーザーズマニュアル
English
38
AUX/ UPnP/SLEEP
AUX (Listening to an external
source, on Center only)
source, on Center only)
You can listen to the sound of the connected
external device through your WAC5 Center.
external device through your WAC5 Center.
1
Check the external device has been properly
connected (See Installation, Connecting an
additional appliance)
connected (See Installation, Connecting an
additional appliance)
2
Check the WAC5 Center is switched on or to
standby (See Basic functions, Switching on/
to standby and selecting functions,
Switching to Eco power/ on)
standby (See Basic functions, Switching on/
to standby and selecting functions,
Switching to Eco power/ on)
3
Press SOURCE once or more to select AUX
(on the remote control, press TUNER/AUX)
(on the remote control, press TUNER/AUX)
4
Press the PLAY key on the connected device to
start playback.
start playback.
5
To adjust the sound and volume, use the sound
controls on your external device
controls on your external device
UPnP (on Station only)
After connecting your WAS5 to an existing
network, you can set up a UPnP* server in the
network. Play from your WAS5 stations the
music collection either on the Center or on the
UPnP server.
*
network, you can set up a UPnP* server in the
network. Play from your WAS5 stations the
music collection either on the Center or on the
UPnP server.
*
Univeral Plug and Play (UPnPTM) builds on
standard networking technologies and provides
standardized protocols for a wide variety of
home and small business devices. It allows easy
interoperability of all the devices supporting the
standardized protocols for a wide variety of
home and small business devices. It allows easy
interoperability of all the devices supporting the
the networking technologies.
Requirements for the UPnP server:
●
The UPnP device has been connected to the
same network as WAS5.
same network as WAS5.
●
UPnP server software is installed (e.g. Philips
Media Manager, Musicmatch® ) and the UPnP
server function is enabled.
Media Manager, Musicmatch® ) and the UPnP
server function is enabled.
– With Philips Media Manager, the UPnP server
function is enabled by default.
function is enabled by default.
To connect a UPnP server
If the WAS5 Station is now connected to
Center,
Center,
1
Check the Center is switched on or to standby
mode
mode
2
Check your UPnP-enabled PC is switched on
– Switch off your firewall
– Switch off your firewall
3
Switch on the Station
4
To select Select Server on Station
a. On the remote control, press MENU.
b. Use the navigation controls 3 or 4 and 2 to
select
select
➜
The Station ‘s display shows the list of servers
connected
➜
Server not found appears if there is no
UPnP server in the network
5
Use the navigation controls 3 or 4 and 2 to
select your desired server
select your desired server
➜
The Station ‘s display shows PC’s music as
it does on PC
If the WAS5 Station has ever been
connected to Center, but is now
disconnected from Center
connected to Center, but is now
disconnected from Center
1
Connect WAS5 to the power supply
➜
Display shows: “Connecting to Center...”
p001-p043_WACS5_Eng_22
9/8/2005, 11:22
38