Philips DGX220/00 ユーザーズマニュアル
Philips Sound Solutions
7
3. The Philips Sound Agent 2 Interface Operation
The following sections provide a detail description of the PSA2 features.
3.1.
Launching the PSA2
DGX220 must be connected to the PC through the USB port. When DGX220 is not connected
to the PC, PSA2 icon in the system tray will appear with the red void mark. See Figure 2.
to the PC, PSA2 icon in the system tray will appear with the red void mark. See Figure 2.
Sound Agent 2 icon
Figure 2
To open the control panel, double click on the PSA2 icon in the System Tray (normally the lower
right hand corner of the screen). This method can be used only if the icon does not have red
void mark on it. See Figure 3.
right hand corner of the screen). This method can be used only if the icon does not have red
void mark on it. See Figure 3.
Figure 3
When you first launch the PSA2 it appears as partially expanded form as shown in Figure 4. To
reveal the Main Control Panel click on the Drop-down arrow at the bottom side of the
Visualization Control Panel.
reveal the Main Control Panel click on the Drop-down arrow at the bottom side of the
Visualization Control Panel.
The panel contains three distinct sections: Compact Control Panel, Main Control Panel and
Visualization Control Panel. To reduce the expanded form to a compact form, use the Resize
button. The Compact Control Panel takes up very little space on the screen and it contains the
top-level controls. However, to set or change some of the settings, you need to expand to the
Main Control Panel. Use the Resize button when you need to expand the Main control panel
again.
Visualization Control Panel. To reduce the expanded form to a compact form, use the Resize
button. The Compact Control Panel takes up very little space on the screen and it contains the
top-level controls. However, to set or change some of the settings, you need to expand to the
Main Control Panel. Use the Resize button when you need to expand the Main control panel
again.