OmniMount AB2-HTS オーナーマニュアル

�

Ceiling

Wall

Step 1

Identify parts

Additional installation tools

Phillips Head Screw Driver

Pencil

Electric Drill

Drill Bits: 1/8'' drill bit for drywall

5/16'' masonry bit for cement wall applications

Step 3

Installation of the wall plate

Mounting to drywall.

1. Use the wall plate as a template and mark the screw hole locations onto the surface using a pencil.
2. Drill into the drywall with a 1/4'' drill bit. Insert the anchors into the hole as shown in fig. 3.
3. Secure with the #12 x 1-3/4'' screws, see fig. 4.

Mounting to solid concrete or cinder block.

1. Drill into the surface with a 3/16'' masonry drill bit 1-3/4" deep and insert the anchors into the holes as shown in Fig. 3
2. Secure wall plate with the #12 x 1-3/4" , see fig. 4.

1/8”

5/16'' mason bit

�

These fasteners and tools are provided

� ��

�

Step 2

Decide on location

�

Extension

Adjusting knuckle

Speaker plate

Mounting plate (1)

Screw covers

Mounting plate (2)

��

(1) (5) M4 X 12mm Phillips

pan head machine screw

(1) (5) M5 X 12mm Phillips pan

head machine screw

(2) (10) #12 X 3/4" Phillips pan

head self-tapping screw

(2) (10) #12 X 1-3/4'' Phillips pan

head self-tapping screw

(1) (5) 5/32'' Hex key

(2) (10) Plastic anchor

(1) (5) 8-32 X 5/8'' Phillips pan

head machine screw

(1) (5) Circular nut (PEM)

8-32 thread

(1) (5) 1/4-20 X 1" Phillips pan

head machine screw

(1) (2) 3/32'' Drill bit

��

�

AB2/AB2 HTS INSTALLATION INSTRUCTIONS

��

�

� �� 

��

�

� �� 

�

AB2 HTS

� � � ��