Epson EB-Z9900W ユーザーズマニュアル
Check
Remedy
Is the correct resolution selected?
(Only when projecting computer images)
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s
s
Computer's documentation
Is the image direction correct?
Make the correct Projection settings in the Extended menu.
s
Image colors are not correct
Check
Remedy
Do the input signal settings match the signals from the connected
device?
device?
Change the following settings according to the signal for the connected equipment.
• When the image is from a device connected to the Computer input port or the BNC input port
• When the image is from a device connected to the Computer input port or the BNC input port
s
Signal - Input Signal
• When the image is from a device connected to the Video input port or the S-Video input port
s
Signal - Video Signal
Is the image brightness adjusted correctly?
Adjust the Brightness setting in the Image menu.
s
Are the cables connected correctly?
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s
Is the contrast
adjusted correctly?
Adjust the Contrast setting in the Image menu.
s
Image - Contrast
Is the color adjustment set correctly?
Adjust the Gamma, RGB, or RGBCMY setting in the Image menu.
s
s
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings in the Image menu.
s
Problem Solving
164