Electrolux EAS(C,E)09C2ASK(W,S,M) ユーザーズマニュアル

Remote control

Remote control battery 
To use the remote control, it is necessary to install two (R03/Ir03x2) alkaline 
AAA batteries. 

1.  The air conditioner will not operate when curtains, doors   other materials 

block the signals between the remote control and the indoor unit.

2.  Avoid spilling any liquid in the remote control.  Do not expose to sunlight or 

any heat source.

3.  If the infrared signal receiver in the indoor unit is exposed to sunlight, the air 

conditioner unit might not work properly.  Use curtains or shades to avoid 
having sunlight directly to the receiver.

4.  If other electrical equipment react to the signals sent by the remote control, 

change the position or consult with you local sales department.

or

1.  Operation mode:  Cool, Heat (Only for 

the models with cool/heat), DRY, FAN, 
and AUTO (Automatic).  

2.  Timer 24 hrs.
3.  Internal temperature range selection:  

17º - 30º.

4.  LCD
5.  Night light operation mode.

33 electrolux remote control

When should the batteries be 
replaced
1.  When there is not a “beep” 

anymore from the indoor unit 
when using the control remote or 
the signal light indicator does not 
lit.

2.  The indoor unit does not respond 

to the remote control commands 
to activate the programs.

To replace batteries
1.  Slide out the battery 

compartment cover ( located in 
the back part of the remote 
control).

2.  Install the two AAA batteries in 

the compartment (indicated in the 
drawing located inside the 
compartment).

3.  Slide in the cover.
4.  If the remote control is not 

operated for long period of times, 
batteries should be discarded. 

Remote control instructions
1.  The signal reach distance of the 

remote control to the receiver that 
is inside the main unit of the air 
conditioner is 8 meters.   Any 
obstruction placed between the 
receiver and the remote control 
can cause interference, limiting 
the capacity of the programming.

2.  Any time that a button is pressed 

in the remote control, the air 
conditioner emits a “beep” that 
indicates that a command has 

1.  When replacing batteries, do not 

use old batteries or a different type 
battery. This may cause the remote 
control to malfunction.

2.  If you do not use the remote 

controller for several weeks remove 
the batteries. Otherwise battery 
leakage may damage the remote 
controller.

3.  The average battery life under 

normal use is about 6 months.

4.  Replace the batteries when there is 

no answering beep from the indoor 
unit or if the Transmission Indicator 
light fails to light.

been received and transmitted in the 
indoor unit.

3.  When selecting the function of 

timer, the remote control sends 
(automatically) a signal to the indoor 
unit at the specific moment.  If the 
control remote is left in a position 
that the signal is blocked, a 15 
minute delay can be produced.

 electrolux 34

Rated voltage

Lowest of voltage of CPU emiting signal

Transmission distance

Environment

3 V

2,0 V

8 m* 

-5ºC ~ 60ºC

REMOTE CONTROLLER SPECIFICATIONS