Husqvarna 326HDA55X-Series ユーザーズマニュアル
16 –
English
WORKING TECHNIQUES
Safety instructions after completing work
•
The transport guard should always be fitted to the cutting
attachment when the machine is not in use.
attachment when the machine is not in use.
•
Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
•
Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
attachment. This is extremely sharp and can easily cause
cuts.
•
Store the machine out of reach of children.
•
Use only original spare parts for repairs.
Basic working techniques
•
Work with a swinging action from the bottom upwards
when trimming sides.
when trimming sides.
•
Adjust the throttle setting to suit the load.
•
When trimming a hedge the engine should always face
away from the hedge.
away from the hedge.
•
Hold the machine as close to your body as possible to get
the best balance.
the best balance.
•
Make sure that the tip does not touch the ground.
•
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
branches have been cut back cleanly.
Changing the hedge trimmer angle
(326HE3, 326HE4)
•
Loosen the knob on the shaft (clockwise).
•
Press the cutting unit against the hedge or some other
firm surface until the required angle is set.
firm surface until the required angle is set.
•
Turn the knob (anti-clockwise).
(326HDA55)
•
Undo the knob.
•
Press the cutting unit against the hedge or some other
firm surface until the required angle is set.
firm surface until the required angle is set.