Olympus D-220 ユーザーズマニュアル
66
E
ADJUSTING THE DATE AND TIME
When adjusting from the camera.
Operate with the lens barrier closed
1
Press the Previous (–) button and the LCD monitor
ON/OFF button at the same time to turn on the monitor.
ON/OFF button at the same time to turn on the monitor.
2
The screen is set to the Date-Print selection mode. Decide
whether to print the date with the Previous (–)/Next (+)
button, then press the OK (shutter) button.
whether to print the date with the Previous (–)/Next (+)
button, then press the OK (shutter) button.
●
Press the Erase mode button to cancel the mode.
●
Date-Print is possible only when printing directly from
the exclusive P-300U printer.
the exclusive P-300U printer.
3
Enter the number for the year with the Previous (–)/Next
(+) button, then press the OK (shutter) button. When the
minutes have been entered, press the OK button to
complete the date setting.
(+) button, then press the OK (shutter) button. When the
minutes have been entered, press the OK button to
complete the date setting.
OK
SET
OK
NO
SET
OK
NO
’96 02 25
11 : 23
SET
OK
NO
’97 12 09
12 : 35
OK
◆
Be sure to set the date, regardless of whether or
not the date is to be printed.
not the date is to be printed.
◆
The adjusted date is canceled when the camera
is left without batteries for more than 30 minutes.
In such a case, adjust the date again.
is left without batteries for more than 30 minutes.
In such a case, adjust the date again.
Note: