Husqvarna 323RJ ユーザーズマニュアル

 

10 – 

 

English

 

•

The transport guard must always be fitted to the cutting 
attachment when the machine is being transported or in 
storage.

 

1

Look around you:

•

To ensure that people, animals or other things cannot 
affect your control of the machine.

•

To ensure that people, animals, etc., do not come into 
contact with the cutting attachment or loose objects that 
are thrown out by the cutting attachment.

•

CAUTION! Do not use the machine unless you are able to 
call for help in the event of an accident.

2

Do not use the machine in bad weather, such as dense 
fog, heavy rain, strong wind, intense cold, etc. Working in 
bad weather is tiring and can lead to dangerous 
conditions, e.g. slippery surfaces.

3

Make sure you can move and stand safely. Check the area 
around you for possible obstacles (roots, rocks, branches, 
ditches, etc.) in case you have to move suddenly. Take 
great care when working on sloping ground.

4

Switch off the engine before moving to another area. Fit 
the transport guard before carrying or transporting the 
equipment any distance.

5

Never put the machine down with the engine running 
unless you have it in clear sight.

 

•

Always slow the engine to idle speed after each working 
operation. Long periods at full throttle without any load on 
the engine can lead to serious engine damage.

 

•

Use a grass cutter or grass blade for clearing grass.

•

Use a trimmer head or plastic blades for lighter clearing 
work, for example along verges or around trees.

 

•

A grass blade is used for all types of tall or coarse grass.

•

The grass is cut down with a sideways, swinging 
movement, where the movement from right-to-left is the 
clearing stroke and the movement from left-to-right is the 
return stroke. Let the left-hand side of the blade (between 
8 and 12 o’clock) do the cutting.

•

If the blade is angled to the left when clearing grass, the 
grass will collect in a line, which makes it easier to collect, 
e.g. by raking.

•

Try to work rhythmically. Stand firmly with your feet apart. 
Move forward after the return stroke and stand firmly 
again.

•

Let the support cup rest lightly against the ground. It is 
used to protect the blade from hitting the ground.

•

Reduce the risk of material wrapping around the blade by 
following these instructions: 

1

Always work at full throttle.

2

Avoid the previously cut material during the return 
stroke.

•

Stop the engine, unclip the harness and place the 
machine on the ground before you start to collect the cut 
material.

 

IMPORTANT!

This section describes the basic safety precautions for 
working with clearing saws and trimmers.

If you encounter a situation where you are uncertain how to 
proceed you should ask an expert. Contact your dealer or 
your service workshop.

Avoid all usage which you consider to be beyond your 
capability.

You must understand the difference between forestry 
clearing, grass clearing and grass trimming before use.