Husqvarna 323RJ ユーザーズマニュアル

ページ / 36
 
4 – 
 
English
 
SAFETY INSTRUCTIONS
 
Personal protective equipment
 
GLOVES Gloves should be worn when necessary, e.g., when 
fitting cutting attachments.
HEARING PROTECTION Wear hearing protection that 
provides adequate noise reduction.
EYE PROTECTION Always wear approved eye protection. If 
you use a visor then you must also wear approved protective 
goggles. Approved protective goggles must comply with 
standard ANSI Z87.1 in the USA or EN 166 in EU countries. 
Visors must comply with standard EN 1731.
BOOTS Wear sturdy, non-slip boots.
CLOTHING Wear clothes made of a strong fabric and avoid 
loose clothing that can catch on twigs and branches. Always 
wear heavy, long pants. Do not wear jewellery, shorts sandals 
or go barefoot. Secure hair so it is above shoulder level.
FIRST AID KIT Always have a first aid kit nearby.
 
Machine
  
′′′′
 
s safety equipment
 
This section describes the machine
 
 
s safety equipment, its 
purpose, and how checks and maintenance should be carried 
out to ensure that it operates correctly. See the ”What is 
what?” section to locate where this equipment is positioned 
on your machine.
 
Throttle lock
 
The throttle lock is designed to prevent accidental operation 
of the throttle control. When you press the lock (A) (i.e. when 
you grasp the handle) it releases the throttle control (B). 
When you release the handle the throttle control and the 
throttle lock both move back to their original positions. This 
movement is controlled by two independent return springs. 
This arrangement means that the throttle control is 
automatically locked at the idle setting.
 
Stop switch
 
Use the stop switch to switch off the engine.
 
Cutting attachment guard
 
This guard is intended to prevent loose objects from being 
thrown towards the operator. The guard also protects the 
operator from accidental contact with the cutting attachment.
IMPORTANT! You must use approved personal protective 
equipment whenever you use the machine. Personal 
protective equipment cannot eliminate the risk of injury but 
it will reduce the degree of injury if an accident does 
happen. Ask your dealer for help in choosing the right 
equipment.
!
 
WARNING! Listen out for warning signals or 
shouts when you are wearing hearing 
protection. Always remove your hearing 
protection as soon as the engine stops.
!
 
WARNING! Never use a machine that has 
faulty safety equipment! Carry out the 
inspection, maintenance and service 
routines listed in this section.
!
 
WARNING! Never use a cutting attachment 
without an approved guard. See the chapter 
on Technical data. If an incorrect or faulty 
guard is fitted this can cause serious 
personal injury.