Cub Cadet SLT1554 ユーザーズマニュアル

ページ / 40
12
SECTION 5:  
 
OPERATING YOUR LAWN TRACTOR
Safety Interlock Switches
This tractor is equipped with a safety interlock system 
for the protection of the operator. If the interlock system 
should ever malfunction, do not operate the tractor. 
Contact your Cub Cadet dealer.
The safety interlock system prevents the engine 
from cranking or starting unless the parking brake is 
engaged, and the PTO (Blade Engage) knob is in 
the disengaged (OFF) position.
The engine will automatically shut off if the operator 
leaves the seat before engaging the parking brake.
The electric PTO (Blade Engage) clutch will 
automatically shut off if the operator leaves the 
tractor’s seat with the PTO (Blade Engage) knob in 
the engaged (ON) position, regardless of whether 
the parking brake is engaged.
With the ignition key in the NORMAL MOWING 
position, the electric PTO (Blade Engage) clutch 
will automatically shut off if the PTO (Blade 
Engage) knob is moved into the engaged (ON) 
position with the drive pedal in position for Reverse 
travel.
WARNING: 
Do not operate the tractor if the
interlock system is malfunctioning. This
system was designed for your safety and
protection.
Reverse Caution Mode
The REVERSE CAUTION MODE position of the key 
switch module allows the tractor to be operated in 
reverse with the blades (PTO) engaged. 
IMPORTANT: Mowing in reverse is not recommended
WARNING: 
Use extreme caution while
operating the tractor in the REVERSE
CAUTION MODE.
 Always look down and
behind before and while backing. Do not
operate the tractor when children or others
are around. Stop the tractor immediately if
someone enters the area.
To use the REVERSE CAUTION MODE:
IMPORTANT:
The operator MUST be seated in the 
tractor seat.
1.
Start the engine as previously instructed in this 
Operator’s Manual.
2.
Turn the key from the NORMAL MOWING 
(Green) position to the REVERSE CAUTION 
MODE
 (Yellow) position of the key switch module. 
See Figure 4.
3.
Depress the REVERSE PUSH BUTTON (Orange, 
Triangular Button) at the top, right corner of the key 
switch module. The red indicator light at the top, left 
corner of the key switch module will be ON while 
activated. See Figure 4.
4.
Once activated (indicator light ON), the tractor can 
be driven in reverse with the cutting blades (PTO) 
engaged.
5.
Always look down and behind before and while 
backing to make sure no children are around.
6.
After resuming forward motion, return the key to the 
NORMAL MOWING position. 
IMPORTANT:
 The REVERSE CAUTION MODE will 
remain activated until:
a. The key is placed in either the NORMAL 
MOWING position or STOP position.
b. The operator leaves the seat.
Figure 4
3TART
0OSITION
3TOP
0OSITION
2EVERSE
0USH
2EVERSE
#AUTION
0OSITION
)NDICATOR
,IGHT
AVOID SERIOUS INJURY OR DEATH
•   GO UP AND DOWN SLOPES, NOT ACROSS. 
•   AVOID SUDDEN TURNS.
• DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIP.
• IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK
DOWNHILL SLOWLY.
• DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.
• NEVER CARRY CHILDREN, EVEN WITH BLADES OFF.
• LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.
• KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES) IN
PLACE AND WORKING.
• REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).
• KNOW LOCATION AND FUNCTION OF ALL CONTROLS.
• BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLAC-
ING HANDS OR FEET NEAR BLADE(S).
• BEFORE LEAVING OPERATOR’S POSITION, DISENGAGE
BLADE(S), PLACE THE SHIFT LEVER IN NEUTRAL, ENGAGE
BRAKE LOCK, SHUT ENGINE OFF AND REMOVE KEY.
READ OPERATOR’S MANUAL
WARNING