Samsung 710TM ユーザーズマニュアル

frequency by referring to the 

Preset Timing Modes

 in the user guide.

 

 
 

        To execute X-Window, you need to make the X86Config file, which is a type of system setting file. 
 

 

1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for setting your mouse.  

3. Set a mouse for your computer.  
4. The next screen is for selecting a keyboard.  

5. Set a Keyboard for your computer.  
6. The next screen is for setting your monitor.  

7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency 

directly.)  

8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)  

9. Enter the model name of your monitor. This information will not affect the actual execution 

of X-Window.  

10. You have finished setting up your monitor.  

Execute X-Window after setting other requested hardware.  

 

 

 

 

 

 

One of the recent problems in using a computer is that the color of the images printed out by a 
printer or other images scanned by a scanner or a digital camera are not the same as those 
shown on the monitor.  

The Natural Color S/W is the very solution for this problem. It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & 

Telecommunications Research Institute (ETRI). 
This system is available only for Samsung monitors and makes the color of the images on the 
monitor the same as the printed or scanned images.  

For more information, refer to Help (F1) in the software program.  

How to install the Natural Color software 

Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial 

screen of the program Natural Color will be executed. Click Natural Color on the initial screen 
to install the Natural Color software. 

To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the [Start] button of Windows and then select [Execute].  
Enter D:\color\eng\setup.exe and then press the <Enter> key.  

(If the drive where the CD is inserted is not D:\, enter the applicable drive.)