Black Box 1- ユーザーズマニュアル

724-746-5500 | blackbox.com

Page 29

Chapter 5: Using Serial Server Manager

5.3 Software Overview

The Serial Server Manager window provides the following information:

• Menus (Server, View, Exit, Help)

• Server Icons (Firmware Upgrade, Virtual COM Configuration, Searching Server, Uninstall Virtual COM, Monitor Port Status)

• Serial Server/Virtual COM Lists

• Software Status (Ready, Updating, Searching, etc.)

5.3.1 Menus

Server

• Firmware Upgrade—Used when downloading new firmware to the Serial Server.

NOTE: See Chapter 9 for more information on upgrading firmware.

• Virtual COM Configuration—Selects the Virtual COM List. Double clicking on any COM port in the Virtual COM List brings up a

window that enables changing the virtual COM settings such as Flow Control, Protocol, IP address, and Port Number. Virtual
COM settings must match Serial Server port settings.

• Searching Server—Searches for Serial Servers on the network and brings back configuration information that will be displayed in

the Server Properties window.

• Uninstall Virtual COM—Enables virtual COM ports to be uninstalled from the Serial Server Manager window.

• Monitor Port Status—Brings up a screen that displays the following information associated with the selected serial port:

Serial TX: Displays the number of bytes of data sent to the serial device since the IP connection was established.

Serial RX: Displays the number of bytes of data received from the connected serial device since the IP connection was

established.

DTR/RTS: The DTR/RTS Port Status indicator displays the current logic state of the DTR and RTS hardware handshake (output)

lines for the selected Serial Server port (1 = asserted, 0 = not asserted).

DCD/DSR/CTS: The DCD/DSR/CTS Port Status indicator displays the current logic state being received on the DCD, DSR, and

CTS hardware handshake (input) lines for the selected Serial Server port (1 = asserted, 0 = not asserted).

Status: Indicates whether the client software has made a connection with the Serial Server.

IP Address: Displays the IP address of the connected client when there is a client connection.

• Save Configuration File—Enables the user to save the current configuration information to a file with a .vcom extension.

• Load Configuration File—Enables the user to load a configuration file.

View

Provides three viewing options for the Serial Server Manager screen:

• Toolbar—enables the toolbar (directly under the menu bar) to be viewable or hidden.

• Status Bar—enables the Status Bar (at the bottom of the screen) to be viewable or hidden.

• Split—enables the position of the split between the Icons pane and the Virtual COM List/Serial Server List panes to be dragged

horizontally using the mouse.

Exit

• Allows you to Exit the Serial Server Manager program.

Help

• Accesses the “About vcomui” dialog box, which indicates the software version number.