Infocus IN5132 ユーザーガイド

122

• Although bright or dark spots may appear on the screen, this is a 

unique characteristic of liquid crystal displays, and it does not constitute or 
imply a machine defect.

NETWORK 

BRIDGE 

function does 

not work

Set COMMUNICATION TYPE to NETWORK BRIDGE in 

the OPTION - SERVICE - COMMUNICATION menu.

72

Schedule 

function does 

not work

Set STANDBY MODE to NORMAL in the SETUP menu.

56

If the projector is in SAVING mode and the projector is 

turned off (or AC power is turned off), the current date 

and time setting has been reset.
Check the DATE AND TIME settings for WIRELESS 

SETUP or WIRED SETUP in the NETWORK menu.

78, 82

When the 

projector is 

connected to 

the network, it 

powers off and 

on as described 

below.

Powers off

POWER 

indicator blinks 
orange several 

times

Goes into  

standby mode

If this situation occurs after connecting to the network, 

there may be a loop between two Ethernet switching 

hubs within the network, as explained below.
-  There are two or more Ethernet switching hubs in the 

network.

- Two of the hubs are connected twice by LAN cables.
-  This double connection forms a loop between the two 

hubs.

Such a loop may have an adverse effect on the projector 

as well as other network devices.
Check the network connection and remove the loop by 

disconnecting the LAN cables so that there is only one  

connecting cable between the two hubs.

–