Infocus IN3102 参照ガイド

Connecting a computer source

Required computer connections (DisplayLink or VESA)

If your computer has Windows XP SP2 or newer*, connect the USB cable

between your computer's USB port and the projector's DisplayLink connector,

then follow the instructions on the screen. See the DisplayLink Manager

User's Guide for more information.

* For the latest information about support for other operating systems

(including Apple), go to www.infocus.com/support/displaylink

Or, connect one end of the provided computer cable to the Computer 2 or

Computer 3

connector on the projector and the other to the VESA connector

on your computer. If you are using a desktop computer, you will need to

disconnect the monitor cable from the computer’s video port first (you can

connect this monitor cable to the Monitor Out connector on the projector, see

below).

Connect the black power cord to the Power connector on the side of the

projector and to your electrical outlet. The Power light on the Status

Indicator Panel (page 14) turns amber.

NOTE

: Always use the power cord that shipped with the projector.

Optional computer connections

To get sound from the projector, connect an audio cable (optional cable, not

included) to your computer and to the Audio In Computer connector on the

projector. You may also need an adapter.

If you are using a desktop computer and want to see the image on your

computer screen as well as on the projection screen, connect the computer’s

monitor cable to the Monitor Out connector on the projector.

NOTE

: DisplayLink video and audio is not sent to monitor out and audio out.

To advance slides in a PowerPoint presentation using the remote control,

plug the USB cable into the USB mouse connector on your computer and

the DisplayLink connector on the projector.

MOLEX

connect USB cable

connect computer cable

connect power cord

connect audio cable

connect monitor cable