Wasp WLS9500 ユーザーガイド
Symbologies 7-39
Discrete 2 of 5 (DTF)
Enable/Disable Discrete 2 of 5
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Set Lengths for Discrete 2 of 5
he length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code
contains. Set lengths for D 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range.
contains. Set lengths for D 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range.
•
One Discrete Length - Select this option to decode only D 2 of 5 symbols containing a selected length. Select
the length using the numeric bar codes in
the length using the numeric bar codes in
Appendix C, Numeric Bar Codes
. For example, to decode only D 2 of
5 symbols with 14 characters, scan D 2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct an
error or to change the selection, scan Cancel on page
error or to change the selection, scan Cancel on page
C-4.
•
Two Discrete Lengths - Select this option to decode only D 2 of 5 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
selected lengths. Select lengths using the numeric bar codes in
Appendix C, Numeric Bar Codes
. For example,
to decode only those D 2 of 5 symbols containing either 2 or 14 characters, select D 2 of 5 - Two Discrete
Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan Cancel on
page
Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan Cancel on
page
C-4
.
•
Length Within Range - Select this option to decode a D 2 of 5 symbol with a specific length range.
Select lengths using numeric bar codes in
Select lengths using numeric bar codes in
Appendix C, Numeric Bar Codes.
For example, to decode D 2 of
5 symbols containing between 4 and 12 characters, first scan D 2 of 5 - Length Within Range. Then scan 0,
4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error or change
the selection, scan Cancel on page
4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error or change
the selection, scan Cancel on page
C-4
.
•
Any Length - Scan this option to decode D 2 of 5 symbols containing any number of characters within the
scanner capability.
scanner capability.
Due to the construction of the D 2 of 5 symbology, it is possible for a scan line covering only a
portion of the code to be interpreted as a complete scan, yielding less data than is encoded in the
bar code. To prevent this, select specific lengths (D 2 of 5 - One Discrete Length - Two Discrete
Lengths) for D 2 of 5 applications.
portion of the code to be interpreted as a complete scan, yielding less data than is encoded in the
bar code. To prevent this, select specific lengths (D 2 of 5 - One Discrete Length - Two Discrete
Lengths) for D 2 of 5 applications.
Enable Discrete 2 of 5
*
Disable Discrete 2 of 5
Note