Wasp WLS9500 ユーザーガイド

User Preferences 4-5

The scanner can be reset to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar code 
below to reset the scanner to its default settings and/or set the scanner’s current settings as the custom default.

•

Restore Defaults - Resets all default parameters as follows:
• If custom default values were configured (see Write to Custom Defaults), the custom default values are set 

for all parameters each time the Restore Defaults bar code below is scanned.

• If no custom default values were configured, the factory default values are set for all parameters each time 

the Restore Defaults bar code below is scanned. (For factory default values, see 

Table A-1 

beginning on 

page A-1.)

 

•

Set Factory Defaults - Scan the Set Factory Defaults bar code below to eliminate all custom default values 
and set the scanner to factory default values. (For factory default values, see 

Table A-1 

beginning on 

page A-1.)

 

•

Write to Custom Defaults - Custom default parameters can be configured to set unique default values for all 
parameters. After changing all parameters to the desired default values, scan the Write to Custom Defaults bar 
code below to configure custom defaults.