Frigidaire FGTC2349KS インストール手順

Handles are secure and tight
Door seals completely to cabinet on all sides
Freezer door is level across the top

Refrigerator is level, side to side and tilted 1/4” (6mm) front to back
Toe grille is properly attached to refrigerator
Cabinet is setting solid on all corners

House power turned on
Refrigerator plugged in

House water supply connected to refrigerator
No water leaks present at all connections - recheck in 24 hours
Ice Maker is turned ON.
Ice & Water Dispenser operates correctly
Front filter must be flush with filter housing (some models)

Shipping material removed
Fresh Food and Freezer controls set
Crisper Humidity controls set
Registration Card sent in

• Load refrigerator from side of cabinet only.
• Do not run retaining straps over handles.
• Do not over-tighten retaining straps.
• Never use refrigerator handles to move the

refrigerator.

• Remove tape from doors only after unit is in

place.

3 PIECES OF TAPE

1 PIECE OF TAPE OR
2 BLUE SHIPPING CLIPS

1 PIECE OF TAPE

1 PIECE OF TAPE

1 PIECE OF TAPE

SHELF SPACER WITH TOE GRILLE

1 PIECE OF TAPE

1 PIECE OF FOAM
OR CARDBOARD

2 WIRE TIES

(All wire baskets
will have 2 wire

ties)

Connect water supply - check for water leaks.
Turn icemaker OFF if water supply is not
connected immediately. Connecting to a
reverse osmosis system is not recommended.

eçìëÉ

éäìãÄáåÖ

äáåÉ

t~íÉêäáåÉ=Üççâìé

Allow the following clearances for ease of installation, proper air circulation, and
plumbing and electrical connections:

•

Sides & Top..........3/8”

•

Back.......................1”

NO

NO

NO

NO

NOTE

TE

TE

TE

TE

  If you are installing your refrigerator beside a wall, leave 1/2” minimum between

hinges and wall to allow for the door to swing open.

√

See “Normal Operating Sights & Sounds” in the 

Use & Care Manual

so you understand the sounds you may hear once your refrigerator is
running.

√

Use & Care Manual to become aware of important

safety instructions and to become familiar with your new refrigerator.

√

Send in Registration card to register your refrigerator.

√

Congratulations! You are ready to enjoy your new refrigerator.

Copper water line
from household water supply

(Include enough tubing in loop to allow

moving refrigerator out for cleaning.)

Steel

Clamp

Plastic Water Tubing

to Ice Maker

Fill Tube

Brass

Compression

Nut

If you need to remove the doors to get your refrigerator in the house, please See
Door Removal Instructions in your Use & Care Manual.

Wire

Signal Arm

Toe Grille

Adjustable Front Roller

(some models)

All four corners of refrigerator must rest firmly on a solid floor. Your
refrigerator has adjustable rollers to help level it and to adjust the doors.

To level cabinet or change door height:
1. Remove toe grille.
2. Use a screwdriver, 3/8” wrench, or nutdriver to adjust the

rollers. To raise cabinet or door, turn screw clockwise. To
lower cabinet or door, turn screw counterclockwise.

When changing control settings, wait 24 hours before making additional adjustments.

Ensure icemaker to turned ON. Check to see that the Ice & Water Dispenser is operating
correctly. (See Automatic Ice & Water Dispenser Features in 

Use & Care Manual.)