ZyXEL P-660HW-D1 ユーザーガイド

Prestige 660H/HW Series User’s Guide

447 

 

Go to the command interpreter interface (

 explains how to access and 

use the commands).

1 Use the sys logs load command to load the log setting buffer that allows you to configure 

which logs the Prestige is to record. 

2 Use sys logs category to view a list of the log categories.

Figure 270   Displaying Log Categories Example

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
sys             exit            device          ether
wan             poe             config          wlan
ip              ppp             bridge          hdap
bm              lan             radius          8021x
P660>

3 Use sys logs category followed by a log category to display the parameters that are 

available for the category.

Figure 271   Displaying Log Parameters Example

ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both]
ras>

4 Use sys logs category followed by a log category and a parameter to decide what to 

record.

Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to 
record only alerts for that category, and 3 to record both logs and alerts for that category. 
Not every parameter is available with every category.

5 Use the sys logs save command to store the settings in the Prestige (you must do this in 

order to record logs).

• Use the sys logs display command to show all of the logs in the Prestige’s log.
• Use the sys logs category display command to show the log settings for all of the log 

categories.

• Use the sys logs display [log category] command to show the logs in an individual 

Prestige log category.

• Use the sys logs clear command to erase all of the Prestige’s logs.