ZyXEL G-360 クイック設定ガイド
ZyXEL G-360 Quick Start Guide
6
3. Secure the ZyXEL G-360 to the computer with a bracket screw.
4. Attach the included antenna to the ZyXEL G-360. The antenna should be
perpendicular to the ground.
5. Replace the computer cover and power on your computer.
6. Double click the Z icon to configure your wireless adapter.
If the ZyXEL Z icon displays, the ZyXEL G-360 is installed
properly. Refer to the User’s Guide to configure the ZyXEL
G-360.
Important Notice:
For users who need enhanced security settings for WPA, WPA-PSK
and 802.1x as well as connecting from the wireless client to the
corporate RADIUS server, you need to install Funk Odyssey Client
software as well.
For users who need enhanced security settings for WPA, WPA-PSK
and 802.1x as well as connecting from the wireless client to the
corporate RADIUS server, you need to install Funk Odyssey Client
software as well.
LED Display
The following table describes the LEDs on the ZyXEL G-360.
LED COLOR STATUS
DESCRIPTION
On
The ZyXEL G-360 is powered.
PWR Green
Off
The ZyXEL G-360 is not powered.
Blinking
The ZyXEL G-360 is receiving or sending data.
LINK Green
Off
The ZyXEL G-360 is not receiving or sending data.