Zotac ZBOX HD-ID11 ユーザーガイド
12
ZOTAC ZBOX
Positioning your ZOTAC ZBOX
Do not position the ZOTAC ZBOX where the ventilation holes are covered. To
guarantee proper use, leave 4 inches (10 cm) spacing in front of the ventilation
holes.
holes.
ZOTAC mini-PC system provide ample connectivities in tiny space, please choose
connectors and cables in appropriate size to avoid interference.
connectors and cables in appropriate size to avoid interference.
Installing your ZOTAC ZBOX to a monitor
You can also install your ZOTAC ZBOX to the back of a monitor. To do so:
1. Secure the VESA mount to your monitor with four screws (HNM/M4x8).
2. Place your ZOTAC ZBOX on the VESA mount noting the correct alignment and
1. Secure the VESA mount to your monitor with four screws (HNM/M4x8).
2. Place your ZOTAC ZBOX on the VESA mount noting the correct alignment and
then secure the PC to the VESA mount with a coin.
To fasten the VESA mount, your monitor must comply with VESA75 Or VESA100
standard.
Mechanical Loading Stability - Mounting of the equipment on the backside of the
monitor should be lay this equipment on a reliable surface when install. A drop or
fall could cause injury.
If the total weight of your monitor and ZOTAC ZBOX is over 7kg, the system may
be unstable.
monitor should be lay this equipment on a reliable surface when install. A drop or
fall could cause injury.
If the total weight of your monitor and ZOTAC ZBOX is over 7kg, the system may
be unstable.
Installing the stand
Erect your ZOTAC ZBOX with the supplied stand. To do so :
1. Locate the screw hole on the bottom of the ZOTAC ZBOX.
2. Align the stand screw to the PC screw hole and then secure the Stand to the PC
1. Locate the screw hole on the bottom of the ZOTAC ZBOX.
2. Align the stand screw to the PC screw hole and then secure the Stand to the PC
with a coin.
Do not place your ZOTAC ZBOX on the desktop without the stand.
←