Uniden d1680 ユーザーガイド

ページ / 22
11
After the selected number of hours, the phone automatically exits silent 
mode. To exit silent mode manually, press and hold 
#
 again.
If the phone is in silent mode and you turn off the answering 
system, the phone exits silent mode.
Multihandset Features
To use the features in this section, you need at least 2 handsets.
Your base supports a total of 12 cordless handsets: the one that came 
with the base and up to 11 DCX160 accessory handsets.
You must register accessory handsets to the base before using them. 
(Handsets that came packaged with the base are already registered.)
Handsets that aren’t registered display a Not Registered message. For 
registration instructions, see p. 18, or see the accessory handset manual.
If a handset was ever registered to a base, you must reset it before it can 
register to a new base; see p. 18, or see the accessory handset manual.
Conference Calling
When an outside call comes in, two handsets can join in a conference 
call with the outside caller. 
To join a call that’s already in progress, just press 
Talk/flash
 or 
sPEakEr
To leave the conference call, hang up normally; the other handset 
remains connected to the call. 
Call Transfer
To...
Press...
transfer a call
inTErcoM/clEar
. The phone puts the call on hold and 
prompts you to select the handset you want to page. 
When the other handset accepts the call, you'll be 
disconnected (press 
Talk/flash
 to rejoin the call).
cancel a transfer
Talk/flash
 to return to the call. 
accept a 
transferred call
inTErcoM/clEar 
to answer the page and speak to the other 
handset. Then, press 
Talk/flash 
to speak to the caller.
Privacy Mode
To activate privacy mode on a call in progress, press 
MEnu/sElEcT
 twice. 
As long as privacy mode is on, you'll see a   in the display, and no other 
handsets can join your call. Privacy mode turns off automatically when 
you hang up; you can also turn it off by pressing 
MEnu/sElEcT
 twice. 
3.