Toshiba A9 ユーザーガイド
53
Getting Started
Adding memory (optional)
6
Using a small Phillips screwdriver, loosen the screw that
secures the memory module slot cover.
secures the memory module slot cover.
(Sample Illustration) Removing the memory module slot cover
7
Remove the memory module slot cover.
8
Place the screw and the cover in a safe place so that you can
retrieve them later.
retrieve them later.
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
Avoid touching the connectors on the memory module or on the
computer. Grease or dust on the connectors may cause memory
access problems.
computer. Grease or dust on the connectors may cause memory
access problems.
9
Carefully remove the new memory module from its antistatic
packaging, without touching its connector.
packaging, without touching its connector.
The computer contains two memory slots. You can insert the
module into any available slot.
module into any available slot.
10
Locate an empty memory slot.
If no memory slot is available, you must remove a module by
performing steps 2-3 of
performing steps 2-3 of
Front of computer
NOTE