Toshiba A8-EZ8511 参照ガイド
25
Adding memory (optional)
5.375 x 8.375 ver 3.1
To connect a USB printer to your computer:
1
Connect the printer cable to the printer and then connect the
other end to one of the computer’s USB ports.
other end to one of the computer’s USB ports.
2
Plug the printer’s power cable into a live electrical outlet.
See your printer documentation for additional configuration steps,
or see “Setting up a printer” in the electronic user’s guide.
or see “Setting up a printer” in the electronic user’s guide.
Adding memory (optional)
HINT: To purchase additional memory modules, see the accessories
information packaged with your system or visit
accessories.toshiba.com.
information packaged with your system or visit
accessories.toshiba.com.
Your computer comes with enough memory to run most of today’s
popular applications. You may want to increase the computer’s
memory if you use complex software or process large amounts of
data.
popular applications. You may want to increase the computer’s
memory if you use complex software or process large amounts of
data.
Installing a memory module
Memory modules can be installed in the memory module slots on
the base of the computer. You will need a small Phillips screwdriver
for this procedure.
the base of the computer. You will need a small Phillips screwdriver
for this procedure.
If the computer has been running recently, the memory module may
be hot. The surrounding area may also be hot. Allow the module to
cool to room temperature before replacing it. Avoid touching the
cover, the module, and the surrounding area before they have cooled.
Failure to follow these directions could result in minor bodily injury.
be hot. The surrounding area may also be hot. Allow the module to
cool to room temperature before replacing it. Avoid touching the
cover, the module, and the surrounding area before they have cooled.
Failure to follow these directions could result in minor bodily injury.
To avoid damaging the computer’s screws, use a small Phillips
screwdriver that is in good condition.
screwdriver that is in good condition.
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
damage the computer, the module, or both.
The computer has two memory module slots — Slot A and Slot B.
You can install one or two memory modules.
You can install one or two memory modules.
Before you install or remove a memory module, turn off the computer
using the Start menu (as shown in step 1 below). If you install or
remove a memory module while the computer is in Standby or
Hibernation mode, data will be lost.
using the Start menu (as shown in step 1 below). If you install or
remove a memory module while the computer is in Standby or
Hibernation mode, data will be lost.
GMA500387010.book Page 25 Thursday, December 28, 2006 12:48 PM