EIKI LC-X7 ユーザーガイド
When the video input signal is connected to the S-VIDEO
jack, select S-Video.
When the video input signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When the video input signal is connected to the VIDEO
jack, select Video.
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
Video
y, Pb/Cb, Pr/Cr
S-Video
Menu Operation
Input Menu icon
Move the pointer (red arrow) to Input
2 and press the SELECT button.
Input
Move the pointer (red
arrow) to Y, Pb/Cb, Pr/Cr ,
Video, or S-video and press
the SELECT button.
Source Select Menu
Video Input Source Selection
Input Selection
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
Input 1
INPUT MENU
Move the pointer (red
arrow) to RGB (Scart) or
RGB (AV HDCP) and press
the SELECT button.
Source Select Menu
Input Menu icon
Move the pointer (red arrow) to Input
1 and press the SELECT button.
RGB (AV HDCP)
RGB (Scart)
When scart video equipment is connected to the INPUT 1
(ANALOG) terminal, select RGB (Scart).
If the HDCP-compatible signal source is connected to the
INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).
INPUT MENU
When Selecting the INPUT 1 with DVI/D-sub 15 terminals
When Selecting the INPUT with 5-BNC/Video/S-Video terminals
✔
Note:
• HDCP (High-bandwidth Digital Content Protection) is a
system for protecting digital entertainment content which is
delivered by DVI (Digital Visual Interface) from being copied.
The specification of HDCP is decided and controlled by
Digital Content Protection, LLC. Should the specification be
changed, this projector may not display the digital content
protected by HDCP.
•
When a slot is empty, the input is displayed in grayout.