Hoshizaki rf28a ユーザーガイド

ページ / 17
II. Installation Instructions
A. Checks Before Installation
• Visually inspect the exterior of the shipping container, and report any severe damage to 
the carrier.
IMPORTANT
Remove shipping tape holding the door, shelves, shelf support clips and 
other parts inside the cabinet. If shipping tape is left in the unit, it will not work 
properly.
• Remove the package containing the accessories.
• See the nameplate on the right-side interior wall, and check that your voltage supplied 
corresponds with the voltage specified on the nameplate.
B. Location
IMPORTANT
This refrigerator/freezer is not intended for outdoor use. Normal operating 
ambient temperature should be within 45°F to 100°F (7°C to 38°C).
For best operating results:
• The refrigerator/freezer should not be located next to ovens, grills or other high heat 
producing equipment.
• The location should provide a firm foundation for the equipment.
• Avoid a site where dripping is not allowed.
• Do not expose the unit to direct sunlight or high temperatures.
• Allow at least 40" (102 cm) clearance at the front of the unit for proper air circulation 
and smooth door operation. Also allow at least 12" (30 cm) clearance from the ceiling 
to the top of the unit for air circulation. See Fig. 2.
• Allow at least 1/2" (13 mm) clearance at the rear of the unit to protect the drain tank 
from the impact of door opening/closing and the wall from the drain tank heat. See 
Fig. 2.
5