Hoshizaki rf28a ユーザーガイド

ページ / 17
D. Electrical Connections 
• This refrigerator/freezer must be plugged into a separate power receptacle which is 
readily accessible and has enough capacity. The maximum allowable voltage variation 
should not exceed ± 10 percent of the nameplate rating. See the nameplate.
• If the supply cord and the plug should need to be replaced, replacement should be 
carried out by a qualified service technician.
• Run the refrigerator/freezer for 1 hour and check for proper temperature before 
putting food in the cabinet.
E. Final Checklist
1) Is the refrigerator/freezer in a site where the ambient temperature is within 45°F to 
100°F (7°C to 38°C) all year?
2) Have the shipping carton and all packing material, tape and protective plastic film on 
the exterior been removed from the refrigerator/freezer?
3) Have all electrical connections been made?
4) Has the power supply voltage been tested or checked against the nameplate rating?
5) Has the user been given the Instruction Manual and instructed on how to operate the 
refrigerator/freezer and the importance of the recommended periodic maintenance?
6) Has the end user been given the name and telephone number of an authorized service 
agent?
7) Has the warranty tag been filled out and forwarded to the factory for warranty 
registration?
7) Clean the interior with a damp cloth containing a neutral cleaner.
8) Install the accessory shelves using the shelf support clips provided.
Fig. 4
Shelf
Center  Shelf  Installation 
for Two-Section Units
7