JVC AX-UXG6 ユーザーズマニュアル
17
English
To go to another track
Before or during playback, press
4 / ¢ button
repeatedly:
Press
¢ button:
Skips to the beginning of the next and succeeding
tracks.
tracks.
Press
4 button:
Goes back to the beginning of the current and
previous tracks.
previous tracks.
Rotating MULTI JOG dial clockwise also changes the tracks
forwards quickly, while rotating it counterclockwise the
tracks reverse quickly.
forwards quickly, while rotating it counterclockwise the
tracks reverse quickly.
< / > button on the remote control is also available
to skipping operations.
to skipping operations.
Programing the Playing Order of the Tracks
— Program Play
— Program Play
You can arrange the order in which the tracks play before
you start playback. You can program up to 32 tracks.
you start playback. You can program up to 32 tracks.
1
Place a CD.
• If the current playing source is not the CD, press
• If the current playing source is not the CD, press
6 (play/pause) button on the CD unit, then 7
(stop) button before going to the next step.
(stop) button before going to the next step.
2
Press PLAY MODE button repeatedly until “CD
PROGRAM” appears in the display window.
PROGRAM” appears in the display window.
• Each time you press the button, playback mode
indicators also change as follows:
3
Rotate MULTI JOG dial to select a track number to
be programed (< / > buttons also available).
be programed (< / > buttons also available).
Track number
Program number
PROGRAM
Canceled
(Normal play)
RANDOM
Continued
4
Press
6 (play/pause) button on the CD unit.
Each track of the CD starts playing one after another,
and stops when the final track has finished playing.
and stops when the final track has finished playing.
• To stop playing back for a moment, press
6
(play/pause) button on the CD unit.
The playback time starts blinking in the display
window.
The playback time starts blinking in the display
window.
• To resume playback, press
6 (play/pause)
button again.
Playback continues from the point where it was
stopped for a while.
Playback continues from the point where it was
stopped for a while.
5
Press
7 (stop) button to stop playing back the CD.
Following information for the CD appears in the display
window.
window.
Total track number
Total playback time
6
Press
0 (open/close) button on the CD unit to
remove the CD.
• Pressing
• Pressing
0 (open/close) button during playback
directly, the CD unit stops playback and opens CD
tray.
tray.
Searching and Skipping Tracks
While playing back a CD, you can do the following
operations.
operations.
To search and skip to a particular point in a track
During playback, press and hold
4 / ¢ button to meet
the desired passages in a track:
Press and hold or
¢ button:
Fast forwards in the track.
Press and hold or
4 button:
Fast reverses in the track.
UP/DOWN button on the remote control is also
available to searching operations.
available to searching operations.
EN14-19.FS-G6[J]/2
99.12.15, 10:43
17