GE 29897 ユーザーガイド

1. If you just adjusted the Remote Access menu, skip to step 2. If you haven’t adjusted 

any other setting, press and release the MENU button until 

DIALING is displayed.

2. Use NEXT or REVIEW or press the keypad number for the desired setting (1 for 

pulse, 2 for tone).

3. When finished, press ENTER to confirm. The unit beeps.

Depending on your area, you may need to set regional area codes. These are needed 
in order for the phone to determine the number format to be displayed when a valid 
Caller ID signal is received. Calls received that match any of the regional area codes 
are displayed as 10 digits. If the number is not displayed correctly, the phone may not 
be able to dial back the number properly. You can store up to 6 regional area codes.
You may need to use this feature if you have:
• Multiple area codes
• Overlapping area codes
• Areas that require 10-digit dialing.
1. If you just adjusted the Dialing menu, skip to step 2. If you haven’t adjusted any 

other setting, press and release the MENU button until 

REGIONAL AC# is displayed. 

The first digit of code #1 flashes.

2. Use NEXT or REVIEW to set the first digit.
3. Press ENTER. The next digit flashes.
4. Repeat steps 2-3 until all the digits of the regional area code are set.
5. When finished, press ENTER to confirm. The unit beeps.