GE 29897 ユーザーガイド

4.  Carefully turn the phone over. Detach the mounting bracket from the two sets of 

top grooves by pressing the tabs in. Pull the bracket from the phone and turn it 
around so that it looks like the diagram. Gently press the bracket into the two sets 
of bottom grooves until it snaps into place.

5.  Plug the line cord into the jack on the back of the base. Wrap the extra line cord, if 

any, around the hooks provided on the bottom of the unit.

6.  Feed the short line cord through the grooves provided so that the bottom of the 

phone is flat and ready to mount on the wall.

7.  Connect the other end of the line cord into the wall phone jack.
8.  Connect the small end of the power adaptor into the POWER 7.5V AC jack on 

the back of the answerer. Plug the other end into an AC power outlet. The unit 
beeps once and is ready for setup or to answer calls with the default greeting and 
settings.

9.  Slip the mounting holes of the base (on bottom of unit) over the wall plate posts 

and slide the base down until the phone is firmly in place.

To move the answerer to a different location in the house, follow these instructions:
1. Disconnect the phone line.
2. Go to the electrical outlet and unplug the power adaptor.
3. Move the unit and phone line to the desired location.
4. Plug in the power adaptor into an electrical outlet.
5. The display shows that the messages have not been erased.
6. Connect the phone line.
7. Reset the time/date settings or wait for the next call to set them automatically.